是否进口:否 | 产地:济南 | 品牌:德明 |
型号:DMWG-2KW3KW | 类型:风能逆变器 | 产品认证:CE |
电路拓扑结构:全桥式 | 输出电压波形:正弦波 | 输入电压范围:0-800V |
输出电压:380V | 输出功率:2KW3KWW | 逆变效率:94% |
电压调整率:10% | 物料编号:01 | 额定容量:2KW3KW |
输出频率:50HZ | 最大输出功率:2KW3KWW | 规格:2KW3KW |
并网风力发电机逆变器技术参数3-5KW
On grid wind turbine three phase inverter 3-5KW
并网风力发电机逆变部分 On grid wind turbine inverter | DMWG3KTL | DMWG5KTL | |
额定交流输出功率 Rated output power (AC) | 3KW | 5KW | |
交流输出功率 Max. Output power (AC) | 3.3KW | 5.5KW | |
输入电压范围 Input voltage rang (DC) | 0-800V | 0-800V | |
MPPT电压范围 MPPT Voltage range (DC) | 150V-700V | 150V-700V | |
直流输入电流 Max. Input current (DC) | 6.8A | 11.2A | |
额定电流 Rated current | 6.2A | 10.2A | |
电流谐波THD Current harmonic | <3%(额定功率时At rated power) | ||
功率因数 Power factor | >0.99 | ||
效率 Max. efficiency | 98% | ||
允许电网电压范围 Allowable grid voltage range (AC) | 220V/380V/440V/480V (三相Three-phase)±20% | ||
允许电网频率范围 Allowable grid frequency range | 50Hz/60Hz±10% | ||
自动投运条件 Automatic operation conditions | 直流输入及电网满足要求,逆变器自动运行 DC input and power grid meet the requirements, the inverter operates automatically | ||
断电后自动重启时间 Restart time after power failure | 30s (时间可调 Adjustable) | ||
自动保护 Automatic protection | 极性反接保护、短路保护、孤岛效应保护、低压穿越、过热保护、过载保护、接地故障保护 Polarity reverse connection protection, short circuit protection, island effect protection, LVRT, overheat protection, overload protection, ground fault protection, etc | ||
显示 Display | 触摸屏 Touch screen | ||
监控内容 Monitoring content | 直流输入电压,电流,功率;逆变器输出电压,电流,功率;累计发电;电网电压,电流。 DC Input voltage, current, power; inverter output voltage,current ,power; Cumulative power generation; Grid voltage ,Current . | ||
防护等级 Protection level | IP20(室内Indoor)IP65 (户外Outdoors) | ||
远程通讯 Telematics | RS485/USB/GPRS/WIFI/Ethernet (可选Optional) | ||
使用环境 Environment | 工作温度-10-60°C,相对湿度<90%不结露 Operating amb. Temp. & Hum -10-60°C,<90% no condensation | ||
噪音 Noise (1m) | <40dB | ||
制冷方式 Refrigeration mode | 强制风冷 Forced air cooling | ||
尺寸重量 | |||
逆变器尺寸重量 Inverter size / weight | 550*225*770mm 49kg | 550*225*770mm 59kg |
*以上技术参数仅供参考,可根据用户需要定制。
*Above parameter only for reference. Could be custom made to user specifications.